2020-2021 Winter Projects
Here are all the projects I hope to complete this winter. Let’s see if I can actually get to them all!
NS: Not Started IP: In Progress DONE: All set!
Hull/Deck
DONE - Polish stainless bow pulpit and other hardware
DONE - Magic Eraser vinyl rubrail
DONE - Replace wood behind digital compass
DONE - Remove, paint, re-attach companionway hatch
DONE - Remove old 5200 from rubrail top; re-caulk
DONE - Sand and paint bootstripe
DONE - Clean old solar vent
DONE - Remove, paint, re-attach cockpit hatches
DONE - Replace stern quarter cleats
DONE - Sand and paint deck
DONE - Repair damaged sliding hatch cover
DONE - Replace worn bulkhead sheet bag
Other
DONE - Have mooring inspected; attach 2021 decal
DONE - Renew registration; attach decals to bow
DONE - Have a leech line added to mainsail
DONE - Buy new spark plug for outboard
DONE - Tighten motor mount
DONE - Replace worn sail cover
Mast
DONE - Replace missing starboard lower turnbuckle pin
DONE - Replace any bent or damaged cotter rings
DONE - Grease halyard sheaves
DONE - Clean and apply SailKote to sail slug slot
Wood
DONE - Sand and varnish tiller and hatchboards
DONE - Sand and varnish cabin sole
DONE - Attach cabin sole stringers
DONE - Re-install hatchslides and coaming tops
DONE - Strip and re-varnish coaming tops and hatchslides
Rudder
DONE - Clean and polish stainless rudder cheeks
DONE - Scrub and clean rudder blade
DONE - Replace fraying TillerClutch control line